Phantom Gen 2 (EPH-V17 & V18) | Wireless Triaxial Vibration Sensor

The new member of the Phantom family. Nearly the same specs as the Phantom Expert and Phantom ATEX Vibration sensors but now smaller!

Phantom Gen 2 is a Triaxial Wireless Vibration Sensor able to send 3 simultaneous FFT and Time waveform recordings at once as often as 4 times per day. Also, our Wireless Vibration Sensors wake up on high vibration levels in order to send data and alarms.

This Phantom has one of the best batteries in the market; it allows you to measure up to 12,000 signals before having to replace it.

As an additional value, our Wireless Vibration Sensors have a built-in integrator, as a result, it can internally calculate velocity parameters for alarms. This way, RMS values ​​can be sent as well.

Condition Monitoring & Industrial Automation | Modbus

Wireless Modbus Vibration Sensors — All Phantoms include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems, PLC’s etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Wireless Vibration Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more

 

 

Phantom All in One (EPH-U14) | Vibration, Current Temperature

Meet the new member of the Phantom family. Take 3 types of measurement parameters with only one module: Vibration, Current and Temperature. Our Phantom condition monitoring system will help you to predict machine failures and save huge amount of costs due to non-programmed down times in production.

 

Vibration

Vibration Phantom is the best all-inclusive battery powered wireless machine monitoring system worldwide. Phantom records vibration FFT from 3 axes simultaneously X, Y and Z.

  • Triaxial
  • Full waveform and spectrum data
  • Programmable Internal RMS Trigger
  • Maximum 6400 Lines of Resolution

 

Current

Current Phantom is a Wireless Current Sensor (Amperage) which uses a simple Current Transformer for monitoring. Easily monitor the AC electrical current of your machines and devices.

  • 1 split core current transformer.
  • Available clamps from 50 to 500 Amp (not included).

 

Temperature

Temperature Phantom is a Bluetooth Temperature Sensor designed to monitor Machine high temperatures. Easily connect any type K Thermocouple sensor (not included). This Wireless Thermocouple Sensor can record accurately from -210ºC up to 1,800ºC.

  • Compatible with type K sensors (not included).
  • Easy to install.
  • It can sensor from -210°C to 1800°C.

Phantom ATEX (EPH-ATX15 & ATX16) | ATEX Certified Triaxial Wireless Vibration Sensor

The new member of the Phantom family. Same specs as the Vibration Phantom but now with ATEX Class Certification (Ex ic IIC T6 Gc X  & Ex ic III Dc X) for gas and dust environments. !

Phantom ATEX is a Triaxial Wireless Vibration Sensor able to send 3 simultaneous FFT and Time waveform recordings at once. Also, our Wireless Vibration Sensor wake up on high vibration levels in order to send data and alarms.

As an additional value, our Wireless Vibration Sensor have a built-in integrator, as a result, it can internally calculate velocity parameters for alarms. This way, RMS values ​​can be sent as well with a selectable periodicity.

ATEX Certificate of Conformance

Condition Monitoring & Industrial Automation | Modbus

Wireless Modbus Vibration Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Wireless Vibration Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more

EPH-G61 | Wireless 4-20mA Sensor

Phantom EPH-G61 features an upgraded version with 16 bits and 4-20 mA input interfaces. This means that you can use any other sensor that can provide a 4-20mA signal to implement your data into an integrated wireless system.

 

 

Condition Monitoring & Industrial Automation | Modbus

 

Wireless Modbus 4-20mA Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Wireless 4-20mA Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more

EPH-G60 | Wireless General Purpose Sensor

Use it with any available Sensor in the Market. The general purpose wireless sensors are able to monitor virtually any type of signal and is compatible with other kind of sensors including: Displacement, speed and proximity. All our General Purpose wireless sensors come with a LEMO connection adapter with capability of up to 2 Analog channels.

 

 

Condition Monitoring & Industrial Automation | Modbus

 

Wireless Modbus Vibration Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Wireless General Purpose Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more

EPH-T25 | Wireless Thermocouple Sensor

 

Easily connect any type of Thermocouple sensor (K). This Wireless Thermocouple Sensor can record accurately from -210ºC up to 1,800ºC.  His battery last as long as any other Phantom sensor and can be easily replaced if needed.

Phantom EPH-T21 is a Bluetooth Temperature Sensor designed to monitor Machine high temperatures.  In addition, Phantom EPH-T21 measures enviromental temperatures.

 

Condition Monitoring & Industrial Automation | Modbus

 

Wireless Modbus Thermocouple Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Wireless Temperature Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more

EPH-V12 | Wireless Vibration Sensor – Biaxial

EPH-V12 is a Wireless Biaxial Accelerometer. This sensor incorporates 2 standard ultra-low noise ICP accelerometers. Being able to send 2 simultaneous FFT and Time waveform recordings for bi-axis at once. Also, our wireless accelerometer can wake up on high vibration levels to send data and alarms.

This Biaxial Wireless Vibration Sensor was designed for low speed machinery. EPH-V12 have a built-in integrator so it can, internally, calculate velocity parameters for alarms. This way, RMS values can be sent as well with a selectable periodicity.

 

 

Condition Monitoring & Industrial Automation | Modbus

 

Wireless Modbus Vibration Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Biaxial Wireless Vibration Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more

EPH-V10 | Wireless Vibration Sensor – High Sensitivity

 

Phantom EPH-V10 is a High Sensitivity Wireless Vibration Sensor able to send 3 simultaneous FFT and Time waveform recordings at once. Also, our Wireless Vibration Sensor wake up on high vibration levels in order to send data and alarms.

As an additional value, our Wireless Vibration Sensor have a built-in integrator, as a result, it can internally calculate velocity parameters for alarms. This way, RMS values ​​can be sent as well with a selectable periodicity.

 

 

Condition Monitoring & Industrial Automation | Modbus

 

Wireless Modbus Vibration Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Wireless Vibration Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more

EPH-C31 | Wireless Current Sensor – 3 Phases

 

Phantom EPH-C31 is a Wireless Current Sensor with 3 channels (Amperage) which uses three simple Current Transformer sensors for installation. Easily monitor the AC electrical current of your machines and devices. This sensor is meant for either measuring 3 phases on a single motor, or else measuring 1 phase for 3 different motors. Includes 3 AC Split-Core current transformer clamps.

EPH-C30 can be set for a Range of 1 to 500 AMP. Additionally, this sensor can measure with precision the power consumption of your electric devices. Each sensor includes 3 simultaneous channels to measure each phase.

 

 

Condition Monitoring & Industrial Automation | Modbus

 

Wireless Modbus Current Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC Etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Wireless Current Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more

 

EPH-S40 | Wireless Speed Sensor

 

This Wireless Speed Sensor uses a Hall effect switch and a neodymium magnet, all included in the kit. As a result, you can easily analyze the revolutions per minute of any rotor, turbine or vent with incredible precision.

Condition Monitoring & Industrial Automation | Modbus

 

Wireless Modbus Speed Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC Etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Wireless Speed Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more