Wireless Vibration Gen 2 Sensor

Phantom Gen 2 (EPH-V17 & V18) | Wireless Triaxial Vibration Sensor

The new member of the Phantom family. Nearly the same specs as the Phantom Expert and Phantom ATEX Vibration sensors but now smaller!

Phantom Gen 2 is a Triaxial Wireless Vibration Sensor able to send 3 simultaneous FFT and Time waveform recordings at once as often as 4 times per day. Also, our Wireless Vibration Sensors wake up on high vibration levels in order to send data and alarms.

This Phantom has one of the best batteries in the market; it allows you to measure up to 12,000 signals before having to replace it.

As an additional value, our Wireless Vibration Sensors have a built-in integrator, as a result, it can internally calculate velocity parameters for alarms. This way, RMS values ​​can be sent as well.

Condition Monitoring & Industrial Automation | Modbus

Wireless Modbus Vibration Sensors — All Phantoms include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems, PLC’s etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Wireless Vibration Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more




  • Full waveform and spectrum data
  • Programmable Internal RMS Trigger
  • Selectable measurement range up to 32G
  • Configurable Alarm interval
  • Standby mode and long battery life
  • Selectable Recording time 1s / 2s / 4s / 8s / 16s
  • Speed + Vibration Integration
  • Configure your sensor using your mobile
  • IP67 Design for protection from liquid and dust


Part Number (EPH-V17 & V18)
Sensor MEMS Tri-axis accelerometer
Frequency Range (@25600 SR) EPH-V17= 4kHz(x,y); 1.8kHz(z)    |   EPH-V18= 10kHz (x,y); 5.1kHz (z)
Dynamic Range EPH-V17= 2 / 4 / 8 G    |   EPH-V18= 8 / 16 / 32 G
Internal Temp. Accuracy ±5°C
Status (Every 5min) Internal RMS, Battery, Temperature, Alarm
Recording Time (s)                                1              2           4           8         16
Sample Rate (Hz)                            25600   12800   6400   3200   1600
Max Frequency (Hz) EPH-V17:       4,000     2,000    1,000    500     250                                                            EPH-V18:    110,000   5,000   2,500   1,250   625
Lines of Resolution 6400
Data Interval Not configurable
Alarm monitoring 2 - 120 sec.
Spectral Noise  EPH-V17: 130 µg/√Hz     |     EPH-V18: 630 µg/√Hz


Wireless Protocol Bluetooth BLE 5.0 / Modbus via Gateway
Operating Frequency 2.4 GHz
Power Output -4dBm to +8dBm
Wireless Range 100m Line sight
Software Compatibility DigivibeMX version Phantom, M30, WiSER VIBE
Firmware Updates via Phantom Manager app (Available for iOS and Android)


Main Power Lithium Battery CR2032 3V
Battery Life Time Up to 12,000 measurements.
Standby mode if Gateway not detected


Dimensions (d x h) 35 x 24 mm
Resistance to Shocks 5000 g
Weight 78 gr
Enclosure Material ABS / Stainless Steel
Protection Rating Water and dust resistant IP67
Fixture Fastener 1/4-28 UNF


Base Temperature Range  -40 to +80 °C (-40 to +176 °F)