This Wireless Speed Sensor uses a Hall effect switch and a neodymium magnet, all included in the kit. As a result, you can easily analyze the revolutions per minute of any rotor, turbine or vent with incredible precision.
Wireless Modbus Speed Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC Etc.
Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Wireless Speed Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication system. Learn more
MEASUREMENT |
|||||
| Part Number | EPH-S40 | ||||
| Sensor | Hall effect sensor | ||||
| Switching Speed | 600 kRPM | ||||
| Active Distance | 5mm to 15mm | ||||
| Internal Temp. Accuracy | ±5°C | ||||
| Status (Every 5min) | Battery, Temperature sensor, RPM | ||||
| Data Interval | 5 minutes not configurable | ||||
| Included Accessories | Hall effect sensor & Neodymium magnet | ||||
CONNECTIVITY AND SOFTWARE |
|||||
| Wireless Protocol | Bluetooth BLE 5.0 / Modbus via Gateway | ||||
| Operating Frequency | 2.4 GHz | ||||
| Power Output Range | -4dBm to +8dBm | ||||
| Wireless Range | 150m Line sight | ||||
| Software Compatibility | DigivibeMX version Phantom, M30, WiSER VIBE | ||||
| Update firmware via Phantom Manager app (Available on iOS and Android | |||||
POWER SUPPLY |
|||||
| Main Power | Lithium battery mod. "1/6D" - 3.7V - 1.7Ah | ||||
| Battery Life Time | 2-3 years | ||||
| Standby mode if Gateway not detected | |||||
DIMENSIONS AND FIXTURE |
|||||
| Dimensions (d x h) | 46 x 43 mm | ||||
| Weight | 160 gr | ||||
| Enclosure Material | ABS / Stainless Steel | ||||
| Protection Rating | Water and dust resistant IP67 | ||||
| Fixture | Fastener 1/4-28 UNF | ||||
ENVIRONMENTAL CONDITIONS |
|||||
| Base Temperature Range | -40 to +80 °C (-40 to +176 °F) | ||||
