Wireless Vibration Sensor – High Sensitivity

wireless high sensitivity

EPH-V10 | Wireless Vibration Sensor - High Sensitivity

Phantom EPH-V10 is a High Sensitivity Wireless Vibration Sensor able to send 3 simultaneous FFT and Time waveform recordings at once. Also, our Wireless Vibration Sensor wake up on high vibration levels in order to send data and alarms.

As an additional value, our Wireless Vibration Sensor have a built-in integrator, as a result, it can internally calculate velocity parameters for alarms. This way, RMS values ​​can be sent as well with a selectable periodicity.

Condition Monitoring & Industrial Automation | Modbus

Wireless Modbus Vibration Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC etc.
Modbus is the most important Standard for Industrial Communication Protocol.

In conclusion, your Wireless Vibration Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more


  • Full waveform and spectrum data
  • Programmable Internal RMS Trigger
  • Low spectral noise
  • Selectable measurement range up to 8G
  • Configurable Alarm interval
  • Standby mode and long battery life
  • Selectable Recording time 1s / 2s / 4s / 8s / 16s
  • Configurable Measurement Interval
  • Speed + Vibration Integration
  • Configure your sensor using your mobile
  • IP67 Design for protection from liquid and dust


Part NumberEPH-V10
SensorMEMS Tri-axis accelerometer
Frequency Range (@25600 SR)4kHz(x,y); 1.8kHz(z) 
Dynamic Range2 / 4 / 8 G
Internal Temp. Accuracy±5°C
Status (Every 5min)Internal RMS, Battery, Temperature, Alarm
Recording Time (s)124816
Sample Rate (Hz)        2560012800640032001600
Max Frequency (Hz)400020001000500250
Lines of Resolution6400
Data Interval10 minutes Configurable or Specific Daytime
Alarm monitoring2 - 120 sec.
Spectral Noise130 µg/√Hz


Wireless ProtocolBluetooth BLE 5.0 / Modbus via Gateway
Operating Frequency2.4 GHz
Power Output-4dBm to +8dBm
Wireless Range100m Line sight
Software CompatibilityDigivibeMX version Phantom, M30, WiSER VIBE
 Firmware Updates via Phantom Manager app (Available for iOS and Android)


Main PowerLithium Battery CR2032 3V
Battery Life TimeUp to 100,000 measurements.
 Standby mode if Gateway not detected


Dimensions (d x h)48 x 34 mm
Resistance to Shocks5000 g
Weight177 gr
Enclosure MaterialABS / Stainless Steel
Protection RatingWater and dust resistant IP67
FixtureFastener 1/4-28 UNF


Base Temperature Range -40 to +85 °C (-40 to +185 °F)