Single-Axis Wireless Accelerometer
What is a WiSER Single Axis Wireless Accelerometer?
WiSER 1x is a single-axis wireless accelerometer for vibration measurement, field diagnostics, and balancing work. It is intended for users who need faster sensor deployment at the machine without changing established analysis practices. The main benefit is reduced setup time at the measuring point while maintaining access to waveform and FFT-based analysis. The sensor is suited to measurements where cable routing adds time, restricts access, or complicates repeatability. Typical use includes spot checks, route-based measurements, in-situ balancing, and follow-up verification after corrective work.
The value of the system is direct: less time spent routing cables, less setup at the measuring point, and faster access to technically useful vibration data
Complete TWF and FFT for Detailed Review
WiSER 1x single-axis wireless accelerometer supports waveform acquisition and FFT collection. This is relevant in field measurements where the user needs more than overall values and where the wireless format must still provide data suitable for technical interpretation. Bandwidth, delay, and recording capability matter because they determine whether the sensor can support detailed review rather than simple screening.
WiSER 1x allows the user to see measurements in real time, review vibration behavior directly after acquisition, and work with data that supports spectral analysis in the field. This makes it appropriate for users who need a wireless sensor for practical measurement work without reducing the analytical value of the signal.
Fits Into Existing Analysis Workflows with Universal Receiver
The Universal Receiver connects WiSER 1x Single-Axis Wireless Accelerometer to existing vibration analysis equipment. This allows wireless measurement capability to be introduced without changing the rest of the measurement chain. Users can keep the collector, software, and reporting structure they already use while replacing the cable run between the sensor and the instrument.
This tool is useful in plants and service environments where the analysis workflow is already defined and the main objective is to reduce setup effort at the machine. The receiver allows WiSER 1x to operate within a familiar measurement structure while adding flexibility at the sensor location. For users working with established wired systems, this is the element that makes wireless deployment practical.
Single-Axis Wireless Accelerometer suitable for Balancing and Field Diagnostics
Compatible with the free mobile app WiSER Vibe and the Windows software DigivibeMX 26, WiSER 1x supports wireless balancing workflows without adding cable setup to the job. For single-plane balancing, the sensor can be deployed quickly at the machine and used directly with the balancing tools in the software, allowing the user to move from measurement to correction with fewer setup steps.
WiSER 1x also supports dual-plane balancing through a sequential process. In this workflow, measurements are taken plane by plane in successive runs, allowing both correction planes to be evaluated without requiring a permanently wired arrangement. This makes the system practical for field balancing jobs where access, portability, and fast redeployment are more important than maintaining a fixed multi-channel installation.
Technical Information
Technical Specs
| Sensitivity | 100 mV/g |
| Operation Distance (max) | 15 m line sight |
| Sample Rate | 48 kHz / 24 bits |
| Dynamic Range | ± 20 g |
| Battery Type | CR123 |
| Battery Life | 8 h continuous usage |
| Dimensions (hxw) | 99 x 49 mm (with mag. base) |
| Weight | 423 grams (with mag. base) |
| Protection Grade | IP67 |
| Software Compatible | DigivibeMX®, WiSER™VIBE PRO |
| Connector | 5-Pin LEMO (5V) |
| Frequency range (±3dB) | 0.5 Hz to 12 kHz |
REQUEST A QUOTE
