Triaxial wireless vibration sensor designed for permanent installation. Sends 3 simultaneous FFT and time-waveform recordings with selectable measurement range up to 32G.

• FFT + time waveform, 3 axes
• Range up to 32G
• Modbus TCP/IP, OPC UA, MQTT
• IP69 protection

High-sensitivity triaxial vibration sensor with low spectral noise. Same form factor as EPH-V11E, optimised for lower-amplitude monitoring.

• FFT + time waveform, 3 axes
• Range up to 8G
• Modbus TCP/IP, OPC UA, MQTT
• IP69 protection

Non-contact infrared temperature sensor. Measures object and ambient temperature up to +380 °C at 1 m, with Modbus, OPC UA and MQTT.

• Object + ambient temperature
• −70 to +380 °C at 1 m
• Modbus TCP/IP, OPC UA, MQTT
• IP67 protection

Wireless thermocouple sensor that records accurately from −210 °C up to 1,800 °C with any Type-K thermocouple. Designed for prolonged exposure on machines and surfaces.

• Object + ambient temperature
• −210 °C to 1,800 °C (Type-K)
• Modbus TCP/IP, OPC UA, MQTT
• IP67 protection

Wireless 4-channel current/power sensor using AC split-core current-transformer clamps. Measure 3 phases on a single motor or 1 phase on 4 motors.

• 4 channels, 3-phase
• 1 to 500 A range
• Modbus TCP/IP, OPC UA, MQTT
• IP67 protection

Hall-effect wireless speed sensor that analyses the revolutions per minute of any rotor, turbine or fan. Kit includes magnet and switch.

• Hall-effect RPM sensor
• Includes magnet + switch
• Modbus TCP/IP, OPC UA, MQTT
• IP67 protection

General-purpose sensor with 2 analog channels via LEMO connector. Compatible with displacement, speed, proximity and other 2.5 Vpp transducers.

• 2 analog channels (LEMO)
• Range AC 2.5 Vpp
• Modbus TCP/IP via Gateway
• IP67 protection

Wireless converter that adapts any 4–20 mA transducer — LVDT, pressure, level — to an integrated Phantom system with 16-bit input resolution.

• 4 channels 4–20 mA
• 16-bit resolution
• Modbus TCP/IP, OPC UA, MQTT
• IP67 protection

Wireless converter with 4 channels of digital 0/1 input. Connect dry-contact sources — limit switches, relays, flow and level switches — and stream their state.

• 4 channels dry-contact (0/1)
• Any digital input source
• Modbus TCP/IP, OPC UA, MQTT
• IP67 protection

Wireless converter with 4 input channels for any 0–10 VDC transducer. Bring existing analog sensors into a Phantom system.

• 4 channels 0–10 VDC
• Any analog 0–10 V source
• Modbus TCP/IP, OPC UA, MQTT
• IP67 protection

High-precision horizontal balancer ideal for high-speed turbochargers and small rotors. Fully portable bench-top design.

• Min Mass: 0.1 kg
• Max Mass: 30 kg
• Max Rotor Diameter: 800 mm
• ISO 2953: 95 %

Workshop balancer for rollers, motor rotors, crankshafts and fans up to 300 kg total. Same chassis as EI-500.

• Min Mass: 1 kg
• Max Mass: 300 kg
• Max Rotor Diameter: 670 mm
• ISO 2953: 97 %

Workshop balancer for rotors up to 500 kg with the same footprint as the EI-300. Built around the SBS suspension system.

• Min Mass: 1 kg
• Max Mass: 500 kg
• Max Rotor Diameter: 670 mm
• ISO 2953: 97 %

Versatile mid-range balancer for rotors up to 1,000 kg. Same chassis as EI-2000 and EI-3000; among the most popular models in the EI range.

• Min Mass: 3 kg
• Max Mass: 1,000 kg
• Max Rotor Diameter: 1,650 mm
• ISO 2953: 97 %

Mid-to-large rotor balancer up to 2,000 kg. Same chassis as EI-1000 and EI-3000, scaled for heavier pedestals.

• Min Mass: 5 kg
• Max Mass: 2,000 kg
• Max Rotor Diameter: 1,650 mm
• ISO 2953: 95 %

Large rotor balancer up to 3,000 kg. Heaviest variant of the 1000/2000/3000 chassis, with ISO 2953 97 % accuracy.

• Min Mass: 5 kg
• Max Mass: 3,000 kg
• Max Rotor Diameter: 1,650 mm
• ISO 2953: 97 %

Heavy-duty balancer for rotors up to 4,500 kg with rotor diameters up to 1,800 mm. Same family as EI-6000.

• Min Mass: 100 kg
• Max Mass: 4,500 kg
• Max Rotor Diameter: 1,800 mm
• ISO 2953: 95 %

Heavy-duty balancer for rotors up to 6,000 kg with rotor diameters up to 2,000 mm. Designed for large industrial rotors.

• Min Mass: 3,000 kg
• Max Mass: 6,000 kg
• Max Rotor Diameter: 2,000 mm
• Speed: 450 – 3,500 RPM

Soft Bearing Suspension kit for DIY balancing machines. Supports up to 300 kg per pair (150 kg per support), shaft diameters up to 152 mm.

• Application: DIY balancing
• Max Load: 300 kg per pair
• Max Shaft: 152 mm
• Residual Unbalance: 2 mg