Wireless Vibration Sensor – High Sensitivity

EPH-V10 | Wireless Vibration Sensor – High Sensitivity

 

Phantom EPH-V10 is a High Sensitivity Wireless Vibration Sensor able to send 3 simultaneous FFT and Time waveform recordings at once. Also, our Wireless Vibration Sensor wake up on high vibration levels in order to send data and alarms.

As an additional value, our Wireless Vibration Sensor have a built-in integrator, as a result, it can internally calculate velocity parameters for alarms. This way, RMS values ​​can be sent as well with a selectable periodicity.

 

 

Condition Monitoring & Industrial Automation | Modbus

 

Wireless Modbus Vibration Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Wireless Vibration Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more

MAIN FEATURES

  • Full waveform and spectrum data
  • Programmable Internal RMS Trigger
  • Low spectral noise
  • Selectable measurement range up to 8G
  • Configurable Alarm interval
  • Standby mode and long battery life
  • Selectable Recording time 1s / 2s / 4s / 8s / 16s
  • Configurable Measurement Interval
  • Speed + Vibration Integration
  • Configure your sensor using your mobile
  • IP67 Design for protection from liquid and dust

DATASHEET | WIRELESS VIBRATION SENSOR - HIGH SENSITIVITY

MEASUREMENT

Part Number EPH-V10
Sensor MEMS Tri-axis accelerometer
Frequency Range (@25600 SR) 4kHz (x,y); 1.8kHz (z)
Dynamic Range 2 / 4 / 8 G
Internal Temp. Accuracy ±5°C
Status (Every 5min) Internal RMS, Battery, Temperature, Alarm
   
Recording Time (s) 1 2 4 8 16
Sample Rate (Hz) 25600 12800 6400 3200 1600
Max Frequency (Hz) 4000 2000 1000 500 250
Lines of Resolution 6400
   
Data Interval 10 minutes Configurable or Specific Daytime
Alarm monitoring 2 - 120 sec.
Spectral Noise (10 Hz) 130 µg/√Hz
 

CONNECTIVITY AND SOFTWARE

Wireless Protocol Bluetooth BLE 5.0 / Modbus via Gateway
Operating Frequency 2.4 GHz
Power Output +8dBm
Wireless Range 150m Line sight
Software Compatibility DigivibeMX version Phantom, M20 & M30, WiSER VIBE
Update firmware via Phantom Updater app
 

POWER SUPPLY

Main Power Lithium battery mod. "1/6D" - 3.7V - 1.7Ah
Battery Life Time 2-4 years
Standby mode if Gateway not detected
 

DIMENSIONS AND FIXTURE

Dimensions (d x h) 48 x 34 mm
Resistance to Shocks 5000 g
Weight 177 gr
Enclosure Material ABS / Stainless Steel
Protection Rating Water and dust resistant IP67
Fixture Fastener 1/4-28 UNF
 

ENVIRONMENTAL CONDITIONS

Base Temperature Range  -40 to +80 °C (-40 to +176 °F)