Wireless Vibration Sensor – Biaxial

EPH-V12 | Wireless Vibration Sensor – Biaxial

EPH-V12 is a Wireless Biaxial Accelerometer. This sensor incorporates 2 standard ultra-low noise ICP accelerometers. Being able to send 2 simultaneous FFT and Time waveform recordings for bi-axis at once. Also, our wireless accelerometer can wake up on high vibration levels to send data and alarms.

This Biaxial Wireless Vibration Sensor was designed for low speed machinery. EPH-V12 have a built-in integrator so it can, internally, calculate velocity parameters for alarms. This way, RMS values can be sent as well with a selectable periodicity.

 

 

Condition Monitoring & Industrial Automation | Modbus

 

Wireless Modbus Vibration Sensor — EPH Sensors include Modbus Protocol for industrial applications. Compatible with Condition Monitoring systems, Scada Systems PLC etc.

Modbus is the most important Standard for Industrial Communication Protocol. In conclusion, your Biaxial Wireless Vibration Sensor is totally compatible with any PLC, Scada system or any other Modbus TCP / IP communication systemLearn more

MAIN FEATURES

  • Full waveform and spectrum data
  • Programmable Internal RMS Trigger
  • High frequency range up to 10kHz
  • Biaxial Ultra Low-noise accelerometer
  • Configurable Alarm interval
  • Standby mode and long battery life
  • Configurable Measurement Interval
  • Configure your sensor using your mobile
  • IP67 Design for protection from liquid and dust

MEASUREMENT

Part Number EPH-V12
Sensor Ultra-low noise piezoelectric sensor
Frequency Range (X,Y) 0.5Hz - 10kHz
Dynamic Range ±3 g
Sample Rate 44100 Hz
Internal Temp. Accuracy ±5°C
Status (Every 5min) Internal RMS, Battery, Temperature, Alarm
Recording Time 1 sec. per channel
Data Interval from 10 minutes
Alarm monitoring 2 - 120 sec.
Spectral Noise (10 Hz) 28 µg/√Hz
 

CONNECTIVITY AND SOFTWARE

Wireless Protocol Bluetooth BLE 5.0 / Modbus Protocol*
Operating Frequency 2.4 GHz
Wireless Range 150m Line sight
Software Compatibility DigivibeMX Phantom, WiSER VIBE, Phantom Updater
 

POWER SUPPLY

Main Power Lithium battery 1/6D / 3.7V / 1.7Ah
Battery Life Time 1 - 2 years
Standby mode if no Gateway detected
 

DIMENSIONS AND FIXTURE

Dimensions 48 x 44 mm
Resistance to Shocks 5000 g
Weight 180 gr
Enclosure Material ABS / Stainless Steel
Protection Rating Water and dust resistant IP67
Fixture Fastener 1/4-28 UNF
 

ENVIRONMENTAL CONDITIONS

Base Temperature Range  -40 to +80 °C (-40 to +176 °F)