A Wireless Accelerometer is a device that converts motion or vibration into a voltage signal which is then transmitted to a receiver using a wireless protocol. Wireless accelerometers are used in industry to avoid the usage of cables which can be expensive or difficult to install.
Our Triaxial Wireless Accelerometer is a vibration sensor specially designed for vibration analysis with universal compatibility in mind. WiSER 3x is a wifi accelerometer that sends 3 axis vibration data + 1 additional channel simultaneously to any data collector on the market. Also, WiSER 3x is a wireless ultra-low noise accelerometer with 12 kHz bandwidth that exceeds the characteristicsof most conventional accelerometers.
Use WiSER 3x on your own system… The Wireless Accelerometer Universal Receiver is specially designed to connect to any vibration analysis equipment on the market to our Wireless Accelerometer. Therefore, This is the # 1 choice for wireless conversion of your system.
Real Time vibration streaming
Our 3 axis accelerometer sends data in real-time with a maximum delay of 0.2 seconds. Thus, allowingmore than 1 million lines of resolution as well as recordings of several hours continuously if needed.
A Wireless Accelerometer compatible with your Cellphone!
Use your cellphone as a Vibration Analyzer: Our triaxial wireless sensor is able to connect to iOS and Windows devices. You can take recordings and perform simple FFT analysis on 4 simultaneous channels with ourvibration analysis app WiSER Vibe Pro. Furthermore, connect your WiSER 3x directly via WiFi, it requires NO receiver!
WiSER 3x will measure Acceleration, Speed, Displacement and Envelope of acceleration in a single recording. No need for independent captures.
The power button is also used to start or stop a capture. Thus, you will not lose time having to release the accelerometer every time you record a new point. This is especially useful when collecting routes.
Anywhere, Anytime… Share Your Data
You have the freedom to manage your data. Feel free to share your measurements through the cloud EIAnalytic.comor by email, granting a deeper level of analysis experience with DigivibeMX.
Just place it and go! Take your wireless sensor, place it at the measuring point and then press button to start a measure. With this in mind you will get multiple measurements in just few seconds!
Multi-platform Wireless Accelerometer
Everything you need, anywhere you need it. Tablet, Laptop, or Mobile… You choose the partform. Use WiSER™ 3x with DigivibeMX software.
High Range & High Sensitivity MEMS type accelerometers (100 mV/G) 6400 Resolution Lines 3 Simultaneous Vibration Recording Off & On Route Recording Compatible only with WiSER Vibe App 50m Distance Range
Wireless Triaxial Accelerometer Full bandwidth 15kHz Sensitivity of 100 mV/G Long Distance Range up to 20m Stainless stell housing Operation temperature up to 185°F (80°C) Ideal for Real Life ODS & Route based Recording
One-Axis Accelerometer Full Bandwidth 15kHz Ultra low-noise accelerometer Long Distance Range up to 15m IP67 Protection Grade Li-ion Rechargeable Battery Ideal for Route Based data Collection