Top 10 Balancing Machines / Dynamic Balancing Machines
A Balancing Machine is an instrument designed to measure and eliminate the Imbalance mass of a rotor. Dynamic Balancing Machines spin the rotor to detect the center of mass through vibration sensors. These vibration sensors are usually accelerometers. Finally, simple calculations will indicate the position of the correction weights to optimize performance.
Balancing tool definition: Imbalance
Imbalance is the irregular distribution of mass surrounding a specific point. It is also defined as the distance between rotation center and mass center. For this reason, it is said that the closer these 2 points are, the lower the Imbalance will be.
Turbo Balancing Machine, EI-30
Erbessd EI-30 Balancing Machine is ideal for turbochargers & assemblies, as well as small rotors. It is a fully portable balancer that can be placed on any workbench. With the help of this balancer you can make efficient and quick dynamic balancing machine jobs with great accuracy.
- Minimum mass: 50 grams
- Maximum mass: 30 kg
- Residual Unbalance: 2 mg
- Speed: 800 – 15,000 RPM
- Type: Soft Bearing
EI-300 Balancing Machine
EI-300 Dynamic Balancing Machine is designed to accurately balance rotors of any type. The length of its bedplate allows balancing rotors of up to 2 meters long to be mounted. Additionally, the EI-300 will allow you to make overhung rotor balancing thanks to its negative supports (optional).
- Minimum mass: 1 kg
- Maximum mass: 300 kg
- Residual imbalance: 2 mg
- Speed: 450 – 5,000 RPM
- Type: Soft Bearing
EI-1000 Balancing Machine
EI-1000 is one of the most versatile balancing machines, allowing you to balance anything, from small rotors to rotors weighing up to 1 ton. This versatility makes this balancer our best seller, as it adapts itself to meet most of rotors’ requirements in an average workshop. With the help of this rotor balancing machine you can perform fast and accurate balancing jobs.
- Minimum mass: 3 kg
- Maximum mass: 1000 kg
- Residual imbalance: 5 mg
- Speed: 450 – 5,000 RPM
- Type: Soft Bearing
EI-2000 Balancing Machine
EI-2000 is a balancing machine for medium and large size rotors. This balancer will allow you to balance rotors from 7 kg to 2 tons. Additionally, this balancing machine has the option for overhung rotors. You can get an extension of the base frame to reach rotors longer than 4 meters.
- Minimum mass: 7 kg
- Maximum mass: 2000 kg
- Residual imbalance: 10 mg
- Speed: 450 – 3,000 RPM
- Type: Soft Bearing
EI-4500 Balancing Machine
EI-4500 Balancing Machine has been designed for heavy rotors. This machine will allow you to balance rotors ranging from 150 kg to 4.5 tons. As with all of our machines, this balancer has an option for overhung rotors. You can get an extension of the base frame to be able to reach balancing rotors longer than 6 meters if needed.
- Minimum mass: 150 kg
- Maximum mass: 4500 kg
- Residual imbalance: 10 mg
- Speed: 400 – 2,500 RPM
- Type: Soft Bearing
EI-6000 Balancing Machine
EI-6000 Balancing Machine has been designed for heavy rotors. This machine will allow you to balancie rotors ranging from 150 kg to 6 tons. As with all of our balancing tool machines, the EI-6000 has an option for overhung rotors. You can get an extension of the base frame to be able reach rotors longer than 6 meters if needed.
- Minimum mass: 150 kg
- Maximum mass: 6000 kg
- Residual imbalance: 10 mg
- Speed: 400 – 2,500 RPM
- Type: Soft Bearing
EI-10T Balancing Machine
While we manufacture machines up to 25T in capacity, EI-10T is our most popular large balancing machine. This machine will allow you to balance tool rotors weighin from 200 kg to 10 tons. Extensions for extra large rotors are available as well as different roller work supports for smaller rotors.
- Minimum mass: 200 kg
- Maximum mass: 10,000 kg
- Residual imbalance: 10 mg
- Speed: 350 – 2,500 RPM
- Type: Soft Bearing
Build your own Balancing Machine / DIY Balancing Machine
With ERBESSD INSTRUMENTS Soft Bearing Suspensions you can build your own balancing tool and have the same quality. ERBESSD INSTRUMENTS provides you with the Soft Bearing Suspensions, as well as the analysis system which is the most critical part. We can provide you with the blueprints for the rest of the parts as well. You will also build your own bedplate and your own balancing machine.
Advantages of building your own Erbessd Balancing Machine
- Save money.
- Avoid high shipping costs.
- Avoid delays due to seafreight shipping.
- Adjust the length and height of your machine according to your needs.
- Adapt the dimensions of the machine to your space requirements.
Soft Bearing Suspensions
Turbo Balancing Machine – Soft Bearing Suspensions
Build your own Turbo Balancing Machine, either on the base of your milling machine or on a station of its own. Erbessd SBS-30 Soft Bearing Suspensions will help you build a very versatile balancer with the high accuracy of soft bearing systems. The blueprints for the machine’s design can be downloaded upon receipt of payment of your SBS system.
- Minimum mass: 50 grams
- Maximum mass: 30 kg
- Residual imbalance: 2 mg
- Speed: 800 – 15,000 RPM
- Type: Soft Bearing
SBS-300 Soft Bearing Suspensions
SBS-300 Soft Bearing Suspensions will help you build your own Balancing Machine. With these Soft Bearing Suspensions, you can make a very versatile balancing tool without sacrificing of soft bearing systems’ high accuracy. Blueprints for the machine’s design can be downloaded upon receipt of payment of your SBS system.
- Minimum mass: 1 kg
- Maximum mass: 300 kg
- Residual imbalance: 2 mg
- Speed: 450 – 5,000 RPM
- Type: Soft Bearing
SBS-1000 Soft Bearing Suspensions
With SBS-1000 Soft Bearing Suspensions, you will manufacture one of the most versatile balancing machines available. The SBS-1000 allows you to balance anything from small 3 kg rotors to medium sized 1000 kg rotors. Balancing will be done quickly and accurately. Blueprints for the balancing tool’s design can be downloaded upon receipt of payment of your SBS system.
- Minimum mass: 3 kg
- Maximum mass: 1000 kg
- Residual imbalance: 5 mg
- Speed: 450 – 5,000 RPM
- Type: Soft Bearing
SBS-2000 Soft Bearing Suspensions
SBS-2000 allows you to create a balancer for large rotors weighing up to 2000 kg. This balancing machine will allow you to perform balancing jobs in 2 planes as well as in a single plane and cantilever. Manufacture the bedplate with the desired length, this way you will not be limited by the size of the rotor. Blueprints of the machine can be downloaded upon receipt of payment of your SBS system.
- Minimum mass: 7 kg
- Maximum mass: 2000 kg
- Residual imbalance: 10 mg
- Speed: 450 – 3,000 RPM
- Type: Soft Bearing
SBS-4500 Soft Bearing Suspensions
SBS-4500 will allow you to balance large rotors. The base of this machine is simple to manufacture, and you should not have any problem starting to work on it right away. SBS-4500 features the well-known precision of soft-bearing rotor balancing machines at a very affordable price. Blueprints for the machine’s design can be downloaded upon receipt of payment of your SBS system.
- Minimum mass: 150 kg
- Maximum mass: 4500 kg
- Residual imbalance: 80 mg
- Speed: 350 – 3,000 RPM
- Type: Soft Bearing
SBS-6000 Soft Bearing Suspensions
SBS-6000 will allow you to balance large rotors. The base of this machine is easy to manufacture, so you should not have any problem starting to work right away. The SBS-6000 features the well-known precision of soft-bearing rotor balancing machines at a very affordable price. Blueprints for the machine’s design can be downloaded upon receipt of payment of your SBS system.
- Minimum mass: 150 kg
- Maximum mass: 6000 kg
- Residual imbalance: 80 mg
- Speed: 350 – 3,000 RPM
- Type: Soft Bearing
SBS-10T Soft Bearing Suspensions
SBS-10T will allow you to balance large rotors. The frame for this machine is simple to manufacture, in a short time you should be up and running. The SBS-10T features the well-known precision of soft-bearing balancing machines at a very affordable price. Blueprints for the rotor balancing machine can be downloaded upon receipt of payment for your SBS system.
- Minimum mass: 200 kg
- Maximum mass: 10,000 kg
- Residual imbalance: 120 mg
- Speed: 350 – 2,500 RPM
- Type: Soft Bearing
SBS-25T Soft Bearing Suspensions SBS-25T
Erbessd’s SBS-25T Suspensions are meant for large equiment. This balancing machine will allow you to balance very large rotors. The frame for this machine is also easy to manufacture using the blueprints provided by us. The SBS-25T features the very well-known precision of soft-bearing balancing machines, at a very affordable price. Blueprints for the rotor balancing machine can be downloaded upon receipt of payment of your SBS system.
- Minimum mass: 400 kg
- Maximum mass: 25,000 kg
- Residual imbalance: 200 mg
- Speed: 120 – 1,800 RPM
- Type: Soft Bearing
